Close×

Plasma Cutting Equipment

Plasma Cutting Equipment

NextGen Plasma Pvt. Ltd. is the OEM Distributor of M/s. Victor Technologies, USA – a Global giant in manufacturing of Digitally controlled Inverter based Manual, Automated and High Precision based Plasma Cutting system of following categories:

Our Plasma Cutting range includes: 

  • Manual Plasma Cutting Machine

  • Automated Plasma Cutting Machine

Manual Plasma Cutting Equipment

Cutmaster 12

Portable IGBT inverter based technology

  • Input power : 230 ±10, 1 Phase, 50/60 Hz.
  • Input kVA rating: 5 kVA
  • Output current : 20 - 40 Amps, Continuously Adjustable
  • Cutting Capacity: 12mm MS
  • Duty Cycle : 40 Amps. @ 40%
  • Air pressure : 4.5 to 5.2 Bar
  • Weight: 14 Kg.

Cutmaster 52

Portable IGBT inverter based technology

  • Input power :230 ±10, 1 Phase & 400 ±10, 3 Phase 50/60 Hz.
  • Input kVA rating: 11 kVA
  • Output current :20 - 60 Amps, Continuously Adjustable
  • Cutting Capacity : 20mm MS
  • Duty Cycle : 60 Amps. @ 40%
  • Air pressure : 4.5 to 5.2 Bar
  • Weight : 19.5 Kg.

CUTMASTER 102 / 152

100Amps. & 120Amps. IGBT Inverter based hand operated Air Plasma Cutting machine.

The Cutmaster 102 and 152, weighing only 62 lbs, offers multi-voltage 1-or 3-phase input capability and provides 120 amps of cutting power for a  30 mm & 40mm recommended cut and 45mm & 50 mm maximum cut. This compact unit, like all other Cutmasters, comes standard with the 1Torch® providing you with the well-known comfort and reliability famous throughout the industry.

Manual Heavy Duty Air Plasma Cutting Equipment

PAK 200i

200 amps of Cutting Power

200 amps of Cutting Power – This unit is capable of hand cutting at 200 amps with the ability to cut up to 2-3/4" (70 mm) on Mild Steel. At full output this unit will cut 10 ipm (254 mm/min) on 2" (51 mm) carbon steel. 100% Duty Cycle – This machine offers 100% duty cycle at full output. Dual Gas Capability – The dual gas system ensures superior quality and performance on ferrous and non-ferrous materials. (Plasma Gas: Air, ArH2 Secondary Gas: Air, N2) High Gouging Removal Rate – With the ability to remove up to 25 lbs (11.3 kg) of carbon steel per hour. Tip Saver for Optimal Tip Life – This ensures that any accidental contact between the tip and the work at high power levels will not damage the tip.

Features

 

  • Simple Operation
  • Easy Acceptance from Operators
  • Clear Visibility of Gouging Area
  • High Material Removal Rates
  • Reduced Smoke in Workplace
  • Reduced Noise for Operator and Other Personnel in Surrounding Area
  • Cutting Capability of up to 2 3/4" (70 mm) with a Consumable Parts change
  •  

 

Automated Plasma Cutting Equipment

Cutmaster A120

Portable IGBT inverter based technology

  • Input power : 400 ±10, 3 Phase 50/60 Hz.
  • Input kVA rating: 23 kVA
  • Output current : 30 - 120 Amps, Continuously Adjustable
  • Production Cutting Capacity: 20mm MS & SS
  • Max. Edge Cutting Capacity: 40mm MS
  • Duty Cycle : 120 Amps. @ 80%
  • Air pressure : 4.5 to 5.8 Bar
  • Weight: 28 Kg.

Auto-Cut 200A / 300A XT

Portable IGBT inverter based technology

  • Auto-Cut 200A / 300A XT Auto-Cut 200 XT & 300 XT systems deliver premium cut performance on both mild steel and non-ferrous metals. These power supplies are designed for reliable, low cost operation. Features like the XT ™301 consumable parts cartridge and the Machine Status Message Center make these models easy to operate.

    The WMS™ process uses nitrogen as the plasma gas while water is used as the secondary gas (shield gas). The water in the torch is divided into its principal components (hydrogen and oxygen) during the cutting process. The hydrogen creates a reduced atmosphere in the cutting zone, isolating it from contaminating elements, and producing a clean, dross-free and oxide-free cut surface. The main amount of the water used during the process (from 4 to 8 GPH, 0.2 to 0.4 l/min) is converted to principal components and thereby does not require the need for disposal.